Tweet
FOR SALE :
1995 Nissan 240sx SE
Originally a Florida Car !
83k Original Miles.
Engine :
S13 SR20det Engine
Built Bottom End
JE Pistons 86.50 Bore
Manley Turbo Tuff Rods
ACL Race Bearings
OEM Oil Pump
OEM Water Pump
Greddy Pulley Kit
Greddy Oil Pan
Nismo Motor Mounts / Trans mount
Built Cylinder Head
Supertech Springs / Retainers
HKS Step 2 264 / 272 Camshafts
HKS Cam Gears
New Oem Timing Chain, tensioner, and guides
ARP Studs
Rocker Arm Stoppers
Custom Catch Can setup - recirc to oil pan
Fuel System:
ATL 12 gal round fuel cell with In Tank Surge Box and Pump -
(Mounted in trunk with Aluminum Trunk Floor)
(OEM Fueltank completely removed)
-6AN Feed Line
-4AN Return line
All Earls Stainless Braided Lines
All Earls AN Fittings
Aeromotive Fuel Filter
HKS Top Feed Fuel Rail
Seimens Fuel Injectors
SX Fuel Pressure Regulator
Turbo Items:
Peak Boost Top Mount Manifold
Garrett GT3071R - Polished and Ceramic Coated
Earls Stainless Braided Line
Earls AN Fittings
Tial 44mm wastegate w/ external dump
3" Stainless V Band Downpipe
3" Test Pipe
Apexi GT Spec Exhaust
Cooling:
Koyo Radiator
Flex a Lite Dual Electric Fans
Carbing Trim Panel
Aluminum Coolant Overflow tank
Drivetrain :
Stock 5 Speed Transmission
Exedy Hyper Single Clutch kit
Driveshaft Shop Aluminum Driveshaft
Kaaz 2 Way LSD
Suspension & Brakes :
Apexi N1 EXV Coilovers
Wilwood Superlite Front Brake Kit
Power Slot Rear Rotors
Hawk Rear Pads
Stainless Brake Lines
Currently on stock suspension arms
Electronics :
AEM EMS Management System
AEM Map Sensor
AEM AIT Sensor
Greddy Profec B Boost Controller
HKS Turbo Timer
Defi Link Controller
Defi BF Boost Gauge
Defi BF Oil Pressure Gauge
Electronic Level Sensor for Fuel Cell
(its not 100% accurate but hey its something to go by)
LCD in Dash CD Player
Exterior :
Seibon DV Carbon Fiber Hood
Seibon Carbon Fiber Trunk Lid
Aerocatch Locking Hood Pins
Authentic C-West Aero Kit
(trimmed rear bumper and added heat shield above exhaust)
C-West Bumper Lights
Chargespeed 20mm Wide Front Fenders
Origin 50mm Rear Wide Fenders
(Fuel door blended into quarter panel)
Authentic German Zenki Glass Housing Headlights
Origin Clear Corner Lights
2 Tone Paint Job - Black Lower & Gunmetal Roof
(Paint is 7 of 10 I'd say, some weather stripping wasnt taped 100% correctly)
(There is a spider crack in the clear coat on the top of the right front fender)
The fender is not damaged though.
New Windshield & Weather Stripping
New Weather Stripping Rear Windshield
Wheels :
Enkei RPF1 SBC Wheels 17x9.5 and 18x10.5
(Current Cooper Tires 245 / 265 in decent shape)
Interior :
Recaro Profi XL Driver Seat
Corbeau Forza Passenger Seat
Corbeau 3" 5 point harnesses
Custom Molded Black Carpet (fits ok)
Autopower 4 point roll bar
Origin Carbon Fiber Door Panels
(trimmed to accept door handles and pull handles, also speaker holes)
Greddy Shift Knob
Sparco "Ring" Suede Steering Wheel & Hub
New Oem Shifter Console & Boot
Aluminum Battery Box - In Trunk Area
MISC Items:
New OEM Full Key and Tumbler Set - Doors, Trunk, & Ignition
With everything including the value of the car, I've got well over 40 invested.
As with any build I dont expect to get near what it cost to build out of it.
If you feel that the opening price is too high, thats cool.
The entire setup currently has 1500 or so miles on it.
Opening Price is $25,000 OBO.
Link to all the pictures :
http://s251.photobucket.com/albums/g...%20Build%20Up/
Thank you,
Robert
513-502-2462
robert@zerolift.com
1995 Nissan 240sx SE
Originally a Florida Car !
83k Original Miles.
Engine :
S13 SR20det Engine
Built Bottom End
JE Pistons 86.50 Bore
Manley Turbo Tuff Rods
ACL Race Bearings
OEM Oil Pump
OEM Water Pump
Greddy Pulley Kit
Greddy Oil Pan
Nismo Motor Mounts / Trans mount
Built Cylinder Head
Supertech Springs / Retainers
HKS Step 2 264 / 272 Camshafts
HKS Cam Gears
New Oem Timing Chain, tensioner, and guides
ARP Studs
Rocker Arm Stoppers
Custom Catch Can setup - recirc to oil pan
Fuel System:
ATL 12 gal round fuel cell with In Tank Surge Box and Pump -
(Mounted in trunk with Aluminum Trunk Floor)
(OEM Fueltank completely removed)
-6AN Feed Line
-4AN Return line
All Earls Stainless Braided Lines
All Earls AN Fittings
Aeromotive Fuel Filter
HKS Top Feed Fuel Rail
Seimens Fuel Injectors
SX Fuel Pressure Regulator
Turbo Items:
Peak Boost Top Mount Manifold
Garrett GT3071R - Polished and Ceramic Coated
Earls Stainless Braided Line
Earls AN Fittings
Tial 44mm wastegate w/ external dump
3" Stainless V Band Downpipe
3" Test Pipe
Apexi GT Spec Exhaust
Cooling:
Koyo Radiator
Flex a Lite Dual Electric Fans
Carbing Trim Panel
Aluminum Coolant Overflow tank
Drivetrain :
Stock 5 Speed Transmission
Exedy Hyper Single Clutch kit
Driveshaft Shop Aluminum Driveshaft
Kaaz 2 Way LSD
Suspension & Brakes :
Apexi N1 EXV Coilovers
Wilwood Superlite Front Brake Kit
Power Slot Rear Rotors
Hawk Rear Pads
Stainless Brake Lines
Currently on stock suspension arms
Electronics :
AEM EMS Management System
AEM Map Sensor
AEM AIT Sensor
Greddy Profec B Boost Controller
HKS Turbo Timer
Defi Link Controller
Defi BF Boost Gauge
Defi BF Oil Pressure Gauge
Electronic Level Sensor for Fuel Cell
(its not 100% accurate but hey its something to go by)
LCD in Dash CD Player
Exterior :
Seibon DV Carbon Fiber Hood
Seibon Carbon Fiber Trunk Lid
Aerocatch Locking Hood Pins
Authentic C-West Aero Kit
(trimmed rear bumper and added heat shield above exhaust)
C-West Bumper Lights
Chargespeed 20mm Wide Front Fenders
Origin 50mm Rear Wide Fenders
(Fuel door blended into quarter panel)
Authentic German Zenki Glass Housing Headlights
Origin Clear Corner Lights
2 Tone Paint Job - Black Lower & Gunmetal Roof
(Paint is 7 of 10 I'd say, some weather stripping wasnt taped 100% correctly)
(There is a spider crack in the clear coat on the top of the right front fender)
The fender is not damaged though.
New Windshield & Weather Stripping
New Weather Stripping Rear Windshield
Wheels :
Enkei RPF1 SBC Wheels 17x9.5 and 18x10.5
(Current Cooper Tires 245 / 265 in decent shape)
Interior :
Recaro Profi XL Driver Seat
Corbeau Forza Passenger Seat
Corbeau 3" 5 point harnesses
Custom Molded Black Carpet (fits ok)
Autopower 4 point roll bar
Origin Carbon Fiber Door Panels
(trimmed to accept door handles and pull handles, also speaker holes)
Greddy Shift Knob
Sparco "Ring" Suede Steering Wheel & Hub
New Oem Shifter Console & Boot
Aluminum Battery Box - In Trunk Area
MISC Items:
New OEM Full Key and Tumbler Set - Doors, Trunk, & Ignition
With everything including the value of the car, I've got well over 40 invested.
As with any build I dont expect to get near what it cost to build out of it.
If you feel that the opening price is too high, thats cool.
The entire setup currently has 1500 or so miles on it.
Opening Price is $25,000 OBO.
Link to all the pictures :
http://s251.photobucket.com/albums/g...%20Build%20Up/
Thank you,
Robert
513-502-2462
robert@zerolift.com
Comment