Tweet
SR20DET PRE-MADE WIRING HARNESSES Offered by DRIFTING.com
Pre-Made Conversion Harnesses.
Finally, there is a solution to wiring headaches. Simply purchase a Wiring Specialties Pre-Made Conversion Harness, install it in under 20 minutes and be on your way. It is no longer necessary to send your harnesses out for wiring service, wait countless days for the work to be completed and still be left with a 20-year old wiring harness under the hood.
What you get with a pre-made harness set
Brand new wiring and connectors
Proper OEM routing of sensor wiring
OEM connector specs (no cheap aftermarket connectors that fall apart)
5-speed and Auto to Manual swap compatible
OEM wiring connections and 'T' connections
Quick installation
Detailed Installation instructions
Each Pre Made Harness will save you time, improve engine performance, give your engine bay a factory look and comes equipped with our Turn Key Start-Up Guarantee!
What you NO LONGER have to worry about
Making sure you have the right JDM harness and in good condition for your engine swap
(replacement JDM harnesses cost $250-$450, depending on the model)
Worrying about the condition of your JDM harness after nearly 20 years of use
Paying a minimum of $50 for shipping of your harnesses to get converted
Paying $120-$450 for the wiring conversion work and hoping that it was properly
WAIT for 2-5 weeks for the work to be completed
At the end of all of this work, you still have a 20-year old harness running the engine, which was modified and altered HEAVILY
Buy a Brand New, pre-made engine and transmission harness set from Wiring Specialties and save up to $350
PRODUCTS
DRIFTING.com is now selling a Brand New set of engine and transmission harnesses for the popular SR20DET, RB25DET and RB20DET engine conversions. These units are designed and manufactured to fit the specific 240sx chassis with the appropriate JDM engine in it, so fitment, looks, wiring routing for MAFS and O2 are proper.
S13 SR20DET Into S14 240sx Pre-Made Harness
NEW, Complete Harness ready for installation
Harnesses AVAILABLE on March 1, 2010: $350.00
Pre-Order NOW Price: $299.00
S13 SR20DET Into S14 240sx Pre-Made Transmission/Lower Harness
NEW, Complete, Plug and Play Harness
Harnesses AVAILABLE on March 1, 2010: $95.00
Pre-Order NOW Price: $79.00
S14 SR20DET Into S14 240sx Transmission/Lower Harness
NEW, Complete Plug and Play Harness
Harnesses AVAILABLE on March 1, 2010: $95.00
Pre-Order NOW Price: $79.00
S15 SR20DET Into S14 240sx Transmission/Lower Harness
NEW, Complete Plug and Play Harness
Harnesses AVAILABLE on March 1, 2010: $99.00
Pre-Order NOW Price: $85.00
• S13 SR20DET into S14 240sx – Available March 1, 2010
• S14 240sx Transmission Harness (fits all SR engines) – Available March 1, 2010
• S13 SR20DET into S13 240sx – ETA April 1, 2010
• S13 240sx Transmission Harness (fits all SR engines) – ETA April 1, 2010
• RB25DET S1 into S13 – In Development - ETA May 1, 2010
• RB25DET S1 into S14 – In Development - ETA May 1, 2010
• RB25DET S2 into S13 – In Development - ETA June 1, 2010
• RB25DET S2 into S14 – In Development - ETA June 1, 2010
• RB20DET S1 into S13 – In Development - ETA May 1, 2010
• S14 SR20DET Zenki into S13 – In Development - ETA June 1, 2010
Pre-Made Conversion Harnesses.
Finally, there is a solution to wiring headaches. Simply purchase a Wiring Specialties Pre-Made Conversion Harness, install it in under 20 minutes and be on your way. It is no longer necessary to send your harnesses out for wiring service, wait countless days for the work to be completed and still be left with a 20-year old wiring harness under the hood.
What you get with a pre-made harness set
Brand new wiring and connectors
Proper OEM routing of sensor wiring
OEM connector specs (no cheap aftermarket connectors that fall apart)
5-speed and Auto to Manual swap compatible
OEM wiring connections and 'T' connections
Quick installation
Detailed Installation instructions
Each Pre Made Harness will save you time, improve engine performance, give your engine bay a factory look and comes equipped with our Turn Key Start-Up Guarantee!
What you NO LONGER have to worry about
Making sure you have the right JDM harness and in good condition for your engine swap
(replacement JDM harnesses cost $250-$450, depending on the model)
Worrying about the condition of your JDM harness after nearly 20 years of use
Paying a minimum of $50 for shipping of your harnesses to get converted
Paying $120-$450 for the wiring conversion work and hoping that it was properly
WAIT for 2-5 weeks for the work to be completed
At the end of all of this work, you still have a 20-year old harness running the engine, which was modified and altered HEAVILY
Buy a Brand New, pre-made engine and transmission harness set from Wiring Specialties and save up to $350
PRODUCTS
DRIFTING.com is now selling a Brand New set of engine and transmission harnesses for the popular SR20DET, RB25DET and RB20DET engine conversions. These units are designed and manufactured to fit the specific 240sx chassis with the appropriate JDM engine in it, so fitment, looks, wiring routing for MAFS and O2 are proper.
S13 SR20DET Into S14 240sx Pre-Made Harness
NEW, Complete Harness ready for installation
Harnesses AVAILABLE on March 1, 2010: $350.00
Pre-Order NOW Price: $299.00
S13 SR20DET Into S14 240sx Pre-Made Transmission/Lower Harness
NEW, Complete, Plug and Play Harness
Harnesses AVAILABLE on March 1, 2010: $95.00
Pre-Order NOW Price: $79.00
S14 SR20DET Into S14 240sx Transmission/Lower Harness
NEW, Complete Plug and Play Harness
Harnesses AVAILABLE on March 1, 2010: $95.00
Pre-Order NOW Price: $79.00
S15 SR20DET Into S14 240sx Transmission/Lower Harness
NEW, Complete Plug and Play Harness
Harnesses AVAILABLE on March 1, 2010: $99.00
Pre-Order NOW Price: $85.00
• S13 SR20DET into S14 240sx – Available March 1, 2010
• S14 240sx Transmission Harness (fits all SR engines) – Available March 1, 2010
• S13 SR20DET into S13 240sx – ETA April 1, 2010
• S13 240sx Transmission Harness (fits all SR engines) – ETA April 1, 2010
• RB25DET S1 into S13 – In Development - ETA May 1, 2010
• RB25DET S1 into S14 – In Development - ETA May 1, 2010
• RB25DET S2 into S13 – In Development - ETA June 1, 2010
• RB25DET S2 into S14 – In Development - ETA June 1, 2010
• RB20DET S1 into S13 – In Development - ETA May 1, 2010
• S14 SR20DET Zenki into S13 – In Development - ETA June 1, 2010
Comment