If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
if your running a MT hold the clutch in rev it up like half a g before redline, pop the clutch out and when you feel tire spinnage.get on the brake.if you brake too soon you will either stall or it wont spin the tires... good luck!
if you want to do it while drifting, you just gotta figure out how to spin the tires faster while sliding. i got a buncha pics of me doin it. you can do the left foot braking thing while drifting. but thats no fun.
just do heel toe with you brake down pretty ard and your gas reved to like 4500 or so, then put it in 1st and absolutly dump the cl;utch, if you go slow you will burn up your clutch. then floor it and either take off, hold the brake or push the clutch in when your done..
it's an electric solenoid that you install in line with your front brakes, Then you hold down the brake and press the button tied into the device. when you let go of the brake the front brakes will stay locked as long as you hold the button. Then punch the gas and burn like all hell broke loose, let go of the button and you release the front brakes. look here for a good install article.
Tashi, no offense but your question has nothing to do with "drift-beginners".
If you want to learn how to drift, "burning out" on a stand still will NOT teach anything about drifting.
Again, don't take it into offense, it's just that you keep saying that "i'm a drift beginner" and burning out will not make you better
Comment