ad

Announcement

Collapse
No announcement yet.

240SX VQ SWAP Kit (VQ35 S13 S14)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 240SX VQ SWAP Kit (VQ35 S13 S14)

    very cool vq35 into s13 for sale as a kit www.vqswap.com
    Last edited by SDARsupertuner; 03-30-2007, 10:44 PM.

  • #2
    Looks very good!! come by and see me at Long Beach.

    Mack

    Comment


    • #3
      I got to say this is one nice and easy swap to get good power and torque. Surprisingly, the VQ actually weighs just a few pounds more than the KA. With that extra 2 cylinders provide the power and torque, the car with this swap will be a monster!
      Hubert Young
      KORE 8 Films

      Comment


      • #4
        V35 is the future motor. After our past experiences between the VQ and the RB, I think the VQ is the way to go. No replacement for displacement.

        Comment


        • #5
          no ls1 no care.

          Comment


          • #6
            may not be a ls1 but the vq35 swap only weighs 330 lbs. almost a 50/50 weight distribution unlike the rb swap that is a 54% front end weight i know i just scaled and aligned Huberts car

            Comment


            • #7
              motor + tranny is 330lbs with accessories and manifolds?

              i find that incredibly difficult to believe.

              Comment


              • #8
                motor complete ready to run including p/s pump and belts at 330lbs does not include trans but you are swapping 1 for 1 on the trans so it does not matter

                Comment


                • #9
                  while that is more beleivable, the 6 speed vq tranny wieghs probably wieghs more than the ka tranny. still kinda light for a dohc metal manifold v6.

                  Comment


                  • #10
                    yes the 6 speed does weigh a bit more but it is low in the center of gravity and in the center of the car you cant ask for more than that

                    Comment


                    • #11
                      any mods needed to the crossmember or oil pan?

                      Comment


                      • #12
                        nothing to the engine itself and the mounts can either be welded onto the crossmember or bolted we suggest welding

                        Comment


                        • #13
                          Total cost break down? You should get more info up on that page about the kit...

                          Comment


                          • #14
                            we will have a full kit breakdown in a day or so we are rushing to get ready for long beach thanks for the interest also if you are a legitimate shop and are wanting to do these swaps we will discount

                            Comment


                            • #15
                              Originally posted by SDARsupertuner View Post
                              we will have a full kit breakdown in a day or so we are rushing to get ready for long beach thanks for the interest also if you are a legitimate shop and are wanting to do these swaps we will discount
                              i like t0 order swap kit for vq to s14 thanks
                              (626) 786-7444
                              (818) 897-7445

                              Ask for CHRIS


                              MILANO MOTORSPORTS-Front-Clips
                              -Engine SWAPS/Installation
                              -Used Parts - all that and a bag of chips
                              -350Z used parts



                              www.Turboneticsinc.com
                              www.cxracing.com
                              www.kaazusa.com
                              www.coopertires.com
                              www.specclutch.com

                              Comment

                              Working...
                              X