RB25DET MOTOR BUILD/TURBO Upgrade (DVD)

[Mute]

Ok boys and girls, so we had a great time doing our first DVD and it went really well, we have a solid motor installed beautifully inside of my S-13 Project car,

well now I'm going to build an Rb25 for 500 HP and add all the bells and whistles to make our car truly track worthy.

Coming Soon, Drifting.com and Ali's Drift Garage present:

Part 2 in our ongoing Tech DVD series

The ULTIMATE RB25 Motor Build and Turbo Upgrade

Filming to Start Early September

We aren't going for massive amounts of power, just to hit our 500HP goal and then likely keep the car tuned in the range of 400-450 HP depending on what ends up being best. Our goal is to ultimately have a motor that can reach our goals dependably and consistently.

Current Sponsors who have signed on:

Speed O Motive (Head and Block Work)
JE PISTONS (Forged Pistons, Pins, Rings)
K1 Rods (Forged Rods)
Apex-i (Electronics component installation and tuning)
Torco Racing Oils (Sponsoring all oil for project car)
KKR TURBOS (Turbo Sponsor)
FERREA Racing Components (Full Valve train components)
NGK USA (Plugs for project)
SPEC Clutches (Double Plate Clutch/Flywheel Set)
Phase2Motortrend (Misc parts sponsor)
Hose Techniques (All applicable hoses for engine)
As of 4-06-07
The Driveshaft Shop (Axles to handle a consistent 400+HP)

I'll be updating this as we still have more sponsors coming on board. Thanks to a lot of you for the support on our first project and I'm looking forward to another great project to come.

[Mute]

New Sponsor

The Driveshaft Shop will be donating axles to our project to handle a consistent pounding of over 450 HP.

[lsx240]

im buying an rb25 soon and plan on building it, i hope this comes out soon ^_^

[INFO]

im buying an rb25 soon and plan on building it, i hope this comes out soon ^_^

this build is covered in 2 DVD's, the first DVD (Head Only) is done

[ALI's DRIFT GARAGE]

Update

Head is complete and will be released independently of the block assembly.

Our new Sponsors:

TOMEI (valve springs, cams, head gasket, timing belt, oil orifice galley)
DEATSCHWERKS (Injectors and injector service)
GARAGE BOSO (technical assistance)
SYKO PERFORMANCE (technical assistance)
LOPEZ CRANKSHAFTS (micro polishing of crank)

Much more to come, also we will begin a full Brian Crower SR20 head build with additional parts from Tomei USA and engine building services performed by Frank Siharath of Garage Boso.