Offcial MBRP x GM Canada x Forgeline "Colorado Speed"Drift Truck Build Up

[HypeMan]

MBRP x Forgeline x GM Canada - Colorado Speed Drift Truck

The "Colorado Speed" Drift Truck is a collaboration between MBRP Performance Exhaust and GM Motors Canada. The truck will be used in a number of event from drifting, to road racing, and even the Silver State Classic.

We welcome all questions, and comments.

Spec List

2007 Chevy Colorado regular cab, short box
Engine -
LS7 427 ci
Custom MBRP Exhaust & Headers
Internal upgrades and custom cam from Exotic Performance plus –
Diamond Pistons 11596
Compstar Connecting Rods
Clevite H series rod (CB663HN) and main bearing (CB2199HX) ARP main and head studs Total seal rings with an AP steel top ring
Comp Cam duration @ .050 is 236/246 on a 114 lobe separation
installed @ 113 intake centerline with .637/.650 lift Manley 5/16 one piece pushrods The heads were O-ringed at West Coast Cylinder Heads Valve springs are comp cams 26921kt

The engine is 428.69 CID. The bore is 4.130, and it has the stock LS-7 4" stroke crankshaft. The compression ratio is 9.37:1 The block was honed with a torque plate, and the crankshaft was computer balanced to
1/4 ounce/inch.

ATI F1A ProCharger intercooled
Aeromotive Eliminator Fuel System
Big Stuff 3 engine management
AFCO Radiator and Cooling fans

Transmission – Borg Warner T - 56 6 speed with Zoom clutches

Gearing – 3.54
Custom fabbed spindles with ADCO chrome moly hub assemblies
Custom 29 gallon fuel cell
Fully caged

Suspension -
Custom Truck arm
AFCO Shocks and Coil springs
Custom Dana 60
Mosier Axle Shafts

Brakes -

Front -
US Brake 4 piston with Drilled rotors

Rear -
US Brake 2 piston with Drilled rotors

Wheels -

Front -Forgeline ZX3r 19 x 9 - Matte Black Centers, Victory Red Outer Rim

Rear - Forgeline ZX3R 19 x 12 - Matte Black Centers, Victory Red Outer Rim


Tires -

Nitto INVO

Front - 255/35/19

Rear - 345/30/19

Interior -

Cobra seats
Autometer Gauges
Sparco Steering Wheel
Sparco 6 point racing harness

Teaser pics











More pics to come!! Stay tuned!

[Piner]

soo who's driving this thing?

[wrxwagon]

this truck for demo's only

[HypeMan]

Has yet to be decided.

soo who's driving this thing?

[HypeMan]

Drift demos yes, but it will most likely be in the Silver State Classic at some point.

this truck for demo's only

[HypeMan]

Anyone have any thoughts on the truck ?

[Bebop]

waste of money in this tough economy

but that's just me

It could look so much better, craftsman series meets japan is what I'm expecting when anyone tries to do a drift truck.... but I guess that will never happen.

[HypeMan]

waste of money in this tough economy

but that's just me

It could look so much better, craftsman series meets japan is what I'm expecting when anyone tries to do a drift truck.... but I guess that will never happen.

Blaze - Can definitely see where your coming from, but as far as building a truck that meets the needs of the parties involved. I think were on the right track. According to MBRP, their is still about another 4-6 months of work to do on the truck, so should be interesting.

[killer406]

Personally, I think Colorados aren't the greatest looking trucks, but with a powertrain and chassis like that, I'd suffer. Awesome, a supercharged LS7 and I love thoses camshaft #'s! Any power numbers yet? Two thumbs up!

[Cavi Mike]

Great wheels, bad fitment.

[HypeMan]

MBRP says they are shooting for 1000 HP! I'll keep you guys updated once we get this thing on a dyno.

Personally, I think Colorados aren't the greatest looking trucks, but with a powertrain and chassis like that, I'd suffer. Awesome, a supercharged LS7 and I love thoses camshaft #'s! Any power numbers yet? Two thumbs up!

[HypeMan]

I love these wheels!! Forgeline has some of the hottest wheels in the world.

Great wheels, bad fitment.