Ok im down to my final problem before i can get back on the road. Please help me out here.
I just did the auto to 5 speed Swap
CenterForce Clutch
Nissan OEM Flywheel
New Master Cyl
New Slave Cyl
Steel Braided Clutch Line with Dampner Removed.
DriveShaft Shop Driveshaft
I bled the slave until i had no more air coming out.
Now the problem is The clutch wont disengage.
When the car is off it can be put into gear, but you cant while the car is running. I put the car on jackstands, i can get it into first with some convincing, but when i press the clutch pedal all the way to the floor, the tires still spin. It seems like the slave cyl pin isnt putting enough pressure on the Clutch fork for the clutch to disengage. I tried to adjust the Master Cyl Stud on the pedal, which resulted in a stiffer pedal but still the same problem.
If anyone has any ideas on how to fix this, any help would greatly be appeciated.
I just did the auto to 5 speed Swap
CenterForce Clutch
Nissan OEM Flywheel
New Master Cyl
New Slave Cyl
Steel Braided Clutch Line with Dampner Removed.
DriveShaft Shop Driveshaft
I bled the slave until i had no more air coming out.
Now the problem is The clutch wont disengage.
When the car is off it can be put into gear, but you cant while the car is running. I put the car on jackstands, i can get it into first with some convincing, but when i press the clutch pedal all the way to the floor, the tires still spin. It seems like the slave cyl pin isnt putting enough pressure on the Clutch fork for the clutch to disengage. I tried to adjust the Master Cyl Stud on the pedal, which resulted in a stiffer pedal but still the same problem.
If anyone has any ideas on how to fix this, any help would greatly be appeciated.
Comment