ad

Announcement

Collapse
No announcement yet.

S14 K's Brakes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • S14 K's Brakes

    I own and Actual Silvia K's S14 in Japan and have been trying for nearly a month to find brake information. I am looking for Brake Rotors (drilled,slotted,both) for the front and rear and Hawk HP+ Pads front and rear. Everyone in the states does the conversions for this and that. I have stock 4 piston front calipers and one piston rears. I have some ideas as to what might work but since I will have to mail them to Japan I don't want to be guessing. I pulled the pads and rotors, took measurements and made outlines of the pads.

    Is there anyone out there that knows for sure what part numbers I need? Has anyone done this yet? Is there a brake specialist, Company, willing to work with me to find out for sure?

    I appreciate any help.

    Thanks .

  • #2
    This is a great question, I will see if I can find any info for you. In the meantime, bump it every couple hours or so until some of the more knowledgable people get on. I would like to know the answer myself.

    Comment


    • #3
      the front are the same as the Iron 30mm Z32 Brakes...

      how do I know know this because my front brakes are off a JDM S14 K's...

      back for the back brakes it is my understanding that it is the same as the USDM sliding single piston brakes...

      Comment


      • #4
        Here are some measurements I took...

        Front:
        Rotor Diameter = 280mm*
        Rotor Thickness = 30mm*
        Hat Outside Diameter = 155mm*
        Pads are Sumitomo SN258P E7X13

        Rear:
        Rotor Diameter = 258mm*
        Rotor Thickness = 9mm*
        Hat Outside Diameter = 165mm*
        Pads are Sumitomo SN551P 8G02

        **** I forgot to measure hat hight. Time to pull the breaks... AGAIN.


        * All measurements are made with a tape measure so may be off a little bit.


        NIS14 - Call me the anal retarded aszmunch... but can you give me a year for the Z32 30mm.... Just so I can place my order?

        Thanks....

        Comment

        Working...
        X