ad

Announcement

Collapse
No announcement yet.

Anybody tried making the KA transmission work on the SR?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Anybody tried making the KA transmission work on the SR?

    From browsing the forums and the net, many claimed the internals of a SR tranny and the DOHC KA tranny are actually identical and that the DOHC KA tranny will fit a SR if the SR's bell housing is swapped over. Is it true? Many continue to say it is too time consuming for such a procedure but no one has actually claimed that they had done it and . FYI, it only took me half an hour to crack open a KA tranny. So I don't think it's that difficult. Anyway, any information regarding this will be appreciated.
    Hubert Young
    KORE 8 Films

  • #2
    It is cake, it works and it is the reason I have 2 spare trannys. It is super easy to swap out the bell housings and more often than not a 'blown' SR or KA tranny is simly when the shifter gets stuck in between gears. Which is SUPER easy to fix once the casing is apart.
    Last edited by LOVMUFN; 09-27-2004, 08:53 AM.

    Comment


    • #3
      yeh, like he said it works just fine with the SR.. it also bolts up to the CA (i'm pretty sure) and parts of it can be used on the RB20

      Comment

      Working...
      X