Like the title implies...I am wondering if this plan that I have setup is a good idea or are there some parts that are unnecessary. I know some people have one opinion while someone else has one completely different. I ask that you not only give your opinion but try to explain why I should go that route. I'm trying to keep the fighting to a minimum. So, with that in place...here we go:
1. Purchase a 95-99 240 in fair to good condition. Look for frame rust and major body problems (twisted frame; twisted body; etc...).
2. Learn to drive the car. Then, after that, small and simple suspension mods (struts/coilovers/anti-roll bars/etc...)
3. Learn to drift the car consistently to where I can enter a drift without a whole lot of effort (I can walk a rocket on one wheel for miles and the learning concept was the same...once I could bring it up consistenly and easily I learned throttle control and weight distribution.)
4. After (and only after) I can drift the car AND my drifting performance/technique is limited by the cars power, consider an SR20 swap or turbo the KA (now this is where I'm looking for most of the opinions.) With the added power I will obviously have to upgrade the suspension and make the frame/body/entire car stiffer (IE roll cage).
5. Make the car look a little better...maybe an S15 KIT or a full S14.5 CONVERSION.
Thats my plan. But it has been very condensed. I know there will be a lot of little and VERY EXPENSIVE steps in between. Any help/suggestions will be greatly appreciated. Thanks!
1. Purchase a 95-99 240 in fair to good condition. Look for frame rust and major body problems (twisted frame; twisted body; etc...).
2. Learn to drive the car. Then, after that, small and simple suspension mods (struts/coilovers/anti-roll bars/etc...)
3. Learn to drift the car consistently to where I can enter a drift without a whole lot of effort (I can walk a rocket on one wheel for miles and the learning concept was the same...once I could bring it up consistenly and easily I learned throttle control and weight distribution.)
4. After (and only after) I can drift the car AND my drifting performance/technique is limited by the cars power, consider an SR20 swap or turbo the KA (now this is where I'm looking for most of the opinions.) With the added power I will obviously have to upgrade the suspension and make the frame/body/entire car stiffer (IE roll cage).
5. Make the car look a little better...maybe an S15 KIT or a full S14.5 CONVERSION.
Thats my plan. But it has been very condensed. I know there will be a lot of little and VERY EXPENSIVE steps in between. Any help/suggestions will be greatly appreciated. Thanks!
Comment