ad

Announcement

Collapse
No announcement yet.

sr20 ignition issues

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • sr20 ignition issues

    ok the ignition stays on constantly, i cannot start the car with the key, either the ignition relays starts buzing or the acc relay on the drivers panel starts clicking, i also noticed that the relay coming off the fuse panel right underneath the clutch pedal clicks.... when i jump the starter off to start the car, i have to let 5th gear out to kil th emotor the key doesnt do anything.... i can start the car and everythign with out it. i did a auto to manual swap. but i have the wires jumped off as i should.... if any one has any clue as to how to solve this or if anyone has had this problem before any help would be much appriciated , thanks


    Matt

  • #2
    double check and triple check your work. If you dont see anything wrong, have someone that has done the swap look it over. I would only be able to help you if i was there to look over what you have, sorry. But here is a helpful site that you can run through and possibly find what your mistake was. http://www.srswap.com/faq/index.asp

    If you still cant figure it out, post in the Zilvia.net forums, they are always helpful. best of luck

    Comment


    • #3
      agreed with tokyo.. if your car started fine with the ka.. then u wired something wrong.

      Comment

      Working...
      X